I'm sorting out some wiring issues on the 1992 102C3. Brake lamps...the solenoid for them is under the drivers seat..how can I tell if it's bad or not? Just check it with a meter? I don't have brake lights and I'm trying to see if that solenoid went bad. Wire# 809 was getting really hot not sure if that had anything to do with it
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160428%2F39bfbdd89ed857f56b9f053f0963ab88.jpg&hash=8a77b9fd6acb4e487fa164872e118c7b6413acc7)
Sent from my iPhone using Tapatalk
Is that red wire a hot and the black is a ground ? I hate when people mix color of wires
Lol. My bad. The red wire is indeed hot. I through that on there temporarily to get s brake light signal to some Walmart special lights. My issue is that I can't figure out which stud in the front J-box is the stud for brake lamps. I have the electrical manual and the maintenance manual but do you think I can find the page that tells me what the studs are? No way
Sent from my iPhone using Tapatalk