Print Page - factory mci-12 with a 50 series

Title: factory mci-12 with a 50 series
Post by: doublee on April 13, 2016, 09:12:23 AM

Sorry for reposting this, I realized I probable had it in the wrong section.
Doe's anyone have a mci-12 with the factory installed 50 series that would be willing to take some pictures and a few measurements in the engine bay or knows of a wrecked one
I'm trying to draw up the factory motor mounts and need a some dimension to double check some of my work and will be happy to share the drawings with all.
Thanks
Mike

Title: Re: factory mci-12 with a 50 series
Post by: Jim Eh. on April 13, 2016, 09:14:34 PM

Sorry my 12 came with a stroker but I would be interested in the .dwg file when you are done. Just for future sakes. :)

Title: Re: factory mci-12 with a 50 series
Post by: doublee on April 14, 2016, 04:58:15 AM

I do now have the front mount 99% design right. If I cant conform the rear I will send you at least the front.
attached is the mounts and radiator from mci parts catalog if any body would like to see.

Title: Re: factory mci-12 with a 50 series
Post by: doublee on April 21, 2016, 06:36:46 AM

I have the front done and is 99.5% confirmed. I can't say 100% because mine is not installed yet. Still needing dimension checked for the rear mounts. If you want the front drawing send me a e-mail and I will share. File is to large to post right now.

Title: Re: factory mci-12 with a 50 series
Post by: Jim Eh. on April 21, 2016, 07:55:01 PM

Got them so you don't have to mail them. BTW I see others are interested as well ;)

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: doublee on April 13, 2016, 09:12:23 AM