Print Page - Eagle diesel fuel air vents

Title: Eagle diesel fuel air vents
Post by: Gary LaBombard on April 01, 2016, 04:20:59 PM

Hey guys,
Just a short question, the air vents next to my diesel fuel fill tube on each side of the bus are now open but I put a small screen in each of them to prevent mud bees etc. from clogging them. My question, is there a (ONE WAY) type of valve normally put on these fittings near the fill tube cap so that pressure is kept on the fuel tanks?

I am not sure if our diesel tanks require pressure to build up in the tanks like in our cars when you open the fill cap. The fitting in question is on the top right hand side of photo.
Thanks ahead of time.

Title: Re: Eagle diesel fuel air vents
Post by: blue_goose on April 02, 2016, 06:27:22 AM

The tanks do not have any pressure in them.
Jack

Title: Re: Eagle diesel fuel air vents
Post by: Gary LaBombard on April 02, 2016, 07:31:55 AM

Thanks Jack, do you or anyone know what fitting is usually installed where I put that screen material?

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Gary LaBombard on April 01, 2016, 04:20:59 PM