BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: captain ron on January 15, 2007, 01:19:20 PM

Title: Making Drivers Seat Swivel
Post by: captain ron on January 15, 2007, 01:19:20 PM
Can I safely make my drivers seat swivel? I bought a couple seats off of Chuck Lott and the Drivers seat is air ride but no swivel. I would love to have it swivel so it can be used as basic interior seating when not in use on the road.
Title: Re: Making Drivers Seat Swivel
Post by: prevost82 on January 15, 2007, 02:03:33 PM
Ron.. see if you can find a Flex-Steel swivel base. I picked up a couple at t wreaking yard. You may have to lenghen it, like I had to do to mine.
Ron
Title: Re: Making Drivers Seat Swivel
Post by: buswarrior on January 16, 2007, 06:45:26 PM
High end truck chairs have a swivel option.

happy coaching!
buswarrior
Title: Re: Making Drivers Seat Swivel
Post by: larryh on January 17, 2007, 06:17:05 AM
Look at conversion vans in wrecking yard not drivers or co/pilot but the next two back almost all have a swivel mount on them and cheaper than drivers seat also.

LarryH