Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Scott & Heather on February 12, 2016, 02:58:23 AM

Title: Fuel filter screen
Post by: Scott & Heather on February 12, 2016, 02:58:23 AM
My 6v92 manual states that there is a fuel filter screen in the mounting housing. Is this true? How can I clean it?


Sent from my iPhone using Tapatalk
Title: Re: Fuel filter screen
Post by: lostagain on February 12, 2016, 03:56:19 AM
Isn't the primary filter often referred to as a "screen"? Meaning that there is no additional screen, other than the spin on filter itself. My 6V92 is this way.

JC
Title: Re: Fuel filter screen
Post by: sledhead on February 12, 2016, 05:20:31 AM
the filters I use and carry as spares
wix   33120 and 33118
dave
Title: Re: Fuel filter screen
Post by: Scott & Heather on February 12, 2016, 06:05:47 AM
Ok that's what I was thinking too. They refer to it as a screen. Just wanted to make sure there wasn't an actual screen there somewhere I needed to clean


Sent from my iPhone using Tapatalk
Title: Re: Fuel filter screen
Post by: TomC on February 12, 2016, 06:02:20 PM
Way back when, the primary filter was a fine screen that was cleanable. The secondary was a threaded "sock". So many still say to clean the screen, and change the sock. Good Luck, TomC
Text only | Text with Images