My bus has all it's original slider windows. Several of them are almost completely stuck and one of them leaks (exterior seal). So I am removing some of them to take them apart and clean them up so they operate smoothly and then I want to reinstall and re-seal them.
What product do y'all recommend to re-seal them on the outside? Mine were sealed with some black caulk-type sealant.
Also is there anywhere to still find the original interior trim/seals? I have two photos below to show the condition of mine and so you know what I'm talking about:
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Feverydayexciting.com%2Fimages%2F1964-gm-4106%2Fwindow-seal-trim-1.JPG&hash=202c5b30604bd72b55baf3304efeb302021f7c5a)
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Feverydayexciting.com%2Fimages%2F1964-gm-4106%2Fwindow-seal-trim-2.JPG&hash=5e8dbb6c437bd5b94baf9523e5eb9d9995ba99ee)
Or can I replace them with something else?
Any other general to-dos or tips/tricks for my windows while I'm working on them appreciated too!
Also what do y'all do to replace the "D" window seals/trim and the door and driver windows seals/trim?
I'm in need of the same rubber trim, but I don't think it's still available.
Give Luke at US Coach in NJ. He'll be the one to have it, or know if it's still available.
Hi Andy & Folks:
For your 4106, we stock the original frame to body window seals as well as felt runner for the sliders.
You can reach us toll free at: 1-888-262-2434.
happy & SAAFE!! Bussin' to All.
LUKE at US COACH