Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: hasta2 on October 31, 2015, 06:25:02 AM

Title: Zf 4 Transmission and jake brake
Post by: hasta2 on October 31, 2015, 06:25:02 AM
  Has anyone had a Jake Brake installed with a ZF transmission. I am having one installed on a L-10 cummins and they can't find where to install the pressure relief switch on the transmission
Title: Re: Zf 4 Transmission and jake brake
Post by: luvrbus on October 31, 2015, 07:58:52 AM
You need to drill and tap one at the front of the pan call ZF they will tell you where to drill and tap it
Title: Re: Zf 4 Transmission and jake brake
Post by: hasta2 on October 31, 2015, 01:04:18 PM
thank You
Title: Re: Zf 4 Transmission and jake brake
Post by: luvrbus on October 31, 2015, 01:07:42 PM
If it was me I would just install a micro switch on the throttle linkage
Text only | Text with Images