Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Doug1968 on September 14, 2015, 06:50:24 AM

Title: MCI 9 Entry Step Pneumatic Valve
Post by: Doug1968 on September 14, 2015, 06:50:24 AM
The Entry Step pneumatic valve located in the panel to the left as you enter the bus has developed an air leak. The gasket between the valve body and the cap has failed and although the step still works air leaks full time.

The Valve is a Peter Paul 643J3DCM - 24v.

Looking for information on where to find the gasket or a replacement valve. Has any of you MCI 9 owners had this issue or replaced this valve with another manufacturers component?

Thanks, Doug
Title: Re: MCI 9 Entry Step Pneumatic Valve
Post by: luvrbus on September 14, 2015, 06:59:22 AM
Doug, you can replace those with a Norgren  1-720-903-7987
Title: Re: MCI 9 Entry Step Pneumatic Valve
Post by: Doug1968 on September 14, 2015, 05:48:09 PM
Clifford,

I'm having no luck finding a Norgren valve with the part number you listed?

Doug
Title: Re: MCI 9 Entry Step Pneumatic Valve
Post by: luvrbus on September 14, 2015, 05:55:06 PM
Sorry Doug that is the phone number just give them your part number and they will cross it over for you  ???
Title: Re: MCI 9 Entry Step Pneumatic Valve
Post by: Doug1968 on September 14, 2015, 06:33:00 PM
Clifford,

Ok! I must be getting old? I wouldn't make a very good detective?

I'll give them a call.

Thanks
Title: Re: MCI 9 Entry Step Pneumatic Valve
Post by: luvrbus on September 14, 2015, 07:04:32 PM
It's not you Doug you know me well enough that you read between the lines with me  ;D
Text only | Text with Images