Print Page - Mc9 oil leak 6v92

Title: Mc9 oil leak 6v92
Post by: Bensmc9 on June 16, 2015, 06:36:02 PM

What is this cover that's leaking behind the water crossover tube and how hard is it to reseal

Title: Re: Mc9 oil leak 6v92
Post by: Scott & Heather on June 17, 2015, 12:20:44 PM

Once tropical storm billy moves on his merry way outta Texas, I can go in back of our 9 and look. We also have a 6v92...I'll try to see what that is on our coach...

Title: Re: Mc9 oil leak 6v92
Post by: Bensmc9 on June 17, 2015, 01:19:12 PM

Thanks, it's a small cover that's leaking but I'm not sure what it's for and if it's attached to anything behind it.

Sent from my iPhone using Tapatalk

Title: Re: Mc9 oil leak 6v92
Post by: luvrbus on June 18, 2015, 12:15:27 PM

That is the governor shaft bearing cover,remove it, use some good pipe thread compound and screw it back it nothing is going to jump out and bite when you remove it

Title: Re: Mc9 oil leak 6v92
Post by: Bensmc9 on June 18, 2015, 09:48:00 PM

Thank you very much

Sent from my iPhone using Tapatalk

Title: Re: Mc9 oil leak 6v92
Post by: Scott & Heather on June 19, 2015, 04:28:49 AM

Thanks cliff. I've been so buried in my fuel tank removal on our other bus that I haven't gotten to this yet. But, sounds like I wouldn't have known what that was anyway :)

Sent from my iPhone using Tapatalk

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Bensmc9 on June 16, 2015, 06:36:02 PM