Print Page - A/C and powersteering lines.

Title: A/C and powersteering lines.
Post by: Slide on January 02, 2007, 05:30:29 PM

I'm getting ready to install dash air A/c and power steering in my 05 Eagle, I am planing to run steel lines the length of the bus with rubber hose at both ends. My question is, what side lines should I run ? I have in mind 3/8 for the high pressure and 1/2 for the return low pressure.Any and all input welcome,thanks.

Title: Re: A/C and powersteering lines.
Post by: TomC on January 03, 2007, 04:35:49 PM

Remember that the pressure line of the power steering can top out at 2500psi, even higher when cold. Good Luck, TomC

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Slide on January 02, 2007, 05:30:29 PM