BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Darkspeed on December 31, 2014, 02:04:25 PM

Title: 4106 tie rod ends
Post by: Darkspeed on December 31, 2014, 02:04:25 PM
I have heard that the oem rebuildable tie rods are not available and there is an aftermarket compatible tie rod end.

Anyone know what the aftermarket part# is or the specs / taper is to the tie rod end?

Thank you!
Todd
Title: Re: 4106 tie rod ends
Post by: pvcces on December 31, 2014, 10:44:55 PM
We had a loose tie rod end some years ago and we found one from a 4905. Loren of Dreamliner coach shipped the tie rod from a coach he was scrapping.

As long as the tie rod is not completely worn out, it should not have any looseness. The way the spring loaded end is designed, it should never have any slack; it it does, it is scrap.

Good luck.

Tom Caffrey
Title: Re: 4106 tie rod ends
Post by: Bill Gerrie on January 01, 2015, 10:17:18 AM
I bet Luke has them. Not much he doesn't have or can't get. 1-888-262-2434