BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Nel on October 23, 2014, 11:14:02 AM
I'm going to start the greasing process on all the fittings i can find on the 4104 , I know there are fittings such as the throw out bearing and others where you can not see how much grease you are putting in. Is there any way to tell besides how many pumps on the grease gun ? Is it possible to over grease and cause problems or does the excess grease just come out of an overflow?
Thanks, Nelson
throw out bearings and S cam bushings would be some that come to mind...
If or when you get manuals for your coach; (sooner is better), they have a chart with all the grease fittings. Copy it and have it laminated and handy every time you lube it. It may also state in manual about some quantity sensitive areas. Make sure you get the good grease and get a carton of eight, ten , or 12. Whatever they have in a carton.