Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Nineforever on October 22, 2014, 04:57:53 AM

Title: Turn Signal headaches 102C3
Post by: Nineforever on October 22, 2014, 04:57:53 AM
Turn signal headache   Left turn signal lights up will flash if you do it manually Right turn signal completely dead .... hazard flasher completely dead . But sometimes they work as they should . We have changed out the clapper located in the main fuse panel to the left of the driver , checked for loose or corroded wires everything looks fine . Any thoughts or suggestions were stumped .
Title: Re: Turn Signal headaches 102C3
Post by: lostagain on October 22, 2014, 07:39:56 AM
Make sure grounds are good at the bottom of the electrical compartment below driver. They corrode on those A, C, and D models.

JC


Sent from my iPhone using Tapatalk
Title: Re: Turn Signal headaches 102C3
Post by: blue_goose on October 22, 2014, 01:18:11 PM
Did you check in the back J box?  Right is pin 6 Left if pin 7.
Jack
Title: Re: Turn Signal headaches 102C3
Post by: Nineforever on October 22, 2014, 07:42:56 PM
Okay ill will check that tomorrow theres power to the clapper and the flasher and have changed out both 
Text only | Text with Images