Unfortunately the wiring and air lines were never hooked up and we're not labeled. Anyone with some help on this would be much appreciated
A 1968 GM "What" these guys need more info than just a 1968 GM to help
Monster you came to the right place.
But in order to help us help you . You have to do a couple things.
Go to your profile and edit the signature line to show your first name and city/state your in.
That way we can direct you to the closest source of parts or assistance. (an you never know but maybe a local busnut near you will notice and offer to come assist)
Also need to know what model '68 GM you just bought.
If you post the serial # the GM guys on the board here will be all over it like a duck on a june bug an get you all sorts of info like who the first owners were an stuff like that!
;D BK ;D
I Feel your pain I bought a 1975 MCI that the PO but a 6v92 in and never hookup any of the wires. In fact when I got we had to but it back together. before I could drive it home. Drove it home with out any gages hook up when I stop to eat or just to stretch my legs had to go back to the rear and shut her down by hand. Still do And I still need some help to get it back together.
Good luck
Danr
I am just curios I hope he didn't buy the 4903 the guy installed a right handed engine in and when he found he bought a right handed engine he tossed in the towel
Quote from: luvrbus on September 15, 2014, 08:15:41 AM
I am just curios I hope he didn't buy the 4903 the guy installed a right handed engine in and when he found he bought a right handed engine he tossed in the towel
YIKES! Clifford I hadn't heard about that one but I can picture it happening!
I hope it's not he case here.
;D BK ;D
The bus that popped into my head, is the 4107 that has been for sale in Montana. ...
Mark
It's a 1968 gmc 5305 fishbowl. Detroit 8v71n with an allison vs2-8. Also all the parts are there for an air throttle. Help with plumbing and wiring this thing would be a godsend.
It shouldn't be that hard on a fishbowl just post photos of what you need to hook up there are sharp guys on GM buses here but I not one of them ;D
Quote from: Monster2791 on September 15, 2014, 07:13:08 PM
It's a 1968 gmc 5305 fishbowl. Detroit 8v71n with an allison vs2-8. Also all the parts are there for an air throttle. Help with plumbing and wiring this thing would be a godsend.
snoop around here for some air throttle tips...
http://s363.photobucket.com/albums/oo78/Dreamscape_Eagle/Engine%20Tranny%20Swap/?action=view¤t=2012-03-19_15-30-18_906.mp4 (http://s363.photobucket.com/albums/oo78/Dreamscape_Eagle/Engine%20Tranny%20Swap/?action=view¤t=2012-03-19_15-30-18_906.mp4)
Quote from: Monster2791 on September 15, 2014, 07:13:08 PM
It's a 1968 gmc 5305 fishbowl.
NAME?? -What is the VIN on your GM? TDH5305-XXXX?
Keep your eye on eBay - shop manuals and parts books pop up frequently, now and then an operator's manual, too. You'll find them invaluable as you putter around with this beast.
I'll second BK's comments about updating your Forum Profile so we can better help you.
FWIW & HTH. . .
;)
I have a 1971 fishbowl with the same running gear, converted to air throttle, I could send you some photo's if you wish.
Photos would be very good. I'm a mechanic so I'm sure I can figure out the electrical. It's mainly the trany lines and air lines I'm having trouble with. So some good photos would be a very good start. I have the shop manuals for the motor and I downloaded a manual for the transmission. Unfortunately there not much help with the hookups.