Hello again, I have just replaced my clutch in my MCI-7 -8v71. After replacing my clutch I went to install my new through-out bearing and when I cleaned off the clutch fork I found it worn so bad that it's scrap. I can't seem to find one here in Yuma. Any ideas as to where to find one and what it should cost? This breakdown is costing more and more every day, sure hope it ends soon.
Thanks Dave >
Hello Dave
Sorry to hear of your troubles. I have the transmission out of my 7 that I will not be using. I don't know what shape the fork is in but if you are interested just let me know and I will clean it up and take a good look at it. You could have it for shipping costs. let me know.
Good luck, Duane
Also might wanna try Sam Caylor (Caylor's Bus Parts) in the Kanasa City Area he specializes in MCI parts and will ship fast! BK ;D
Duane thanks. If you would check it out I sure would appreciate it.You can e-mail me or I can give you my number in Yuma or you can give me your number and I can call you. I know nothing about shipping but would be happy to pay. Please let me know.
Thanks Dave
Hi Dave
Here is my number 509 979-2534
Give about an hour to get the shop warmed up and get the fork pulled off to clean it up and see what shape it is in
Talk to you soon, Duane
Just incase ya need it Sam's # @ Caylors is 785-878-3405 BK ;D
Thanks to all of you for your input,it's nice to be able to find help when one is far from home. I spoke with Duane and he is sending me the fork I need in the morning.I should have this thing up and running soon.
Thanks again Dave