Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Rick 74 MC-8 on June 08, 2014, 07:59:08 AM

Title: differential fluid level
Post by: Rick 74 MC-8 on June 08, 2014, 07:59:08 AM
My MC-8 has two plugs for checking the fluid levels on the differential. One is on the housing and one on the pumpkin. There is about an inch difference in height. Which is correct? Anyone

Thank you

Rick
Title: Re: differential fluid level
Post by: Lee Bradley on June 08, 2014, 10:03:58 AM
I would use the pumpkin hole as it is in the housing for that gear set.  The axle housing can have a number of different pumpkins installed in it.
Title: Re: differential fluid level
Post by: luvrbus on June 08, 2014, 11:03:44 AM
Pump in the axle housing till it come out the differential plug hole is the way most are setup 
Title: Re: differential fluid level
Post by: Rick 74 MC-8 on June 09, 2014, 04:56:22 AM
That makes sense

Thanks.  Rick
Text only | Text with Images