Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: pete36330 on May 27, 2014, 05:55:55 AM

Title: mc9 front cap
Post by: pete36330 on May 27, 2014, 05:55:55 AM
Hello,
Does anyone have a raised front cap that will fit a mc9?hopefully somewhere in the southeast,
Will buy or trade if I have something you need .
Thanks Pete
Title: Re: mc9 front cap
Post by: Scott & Heather on May 27, 2014, 07:10:59 AM
People in california sometimes give these away... but that's not the southeast.  :(
Title: Re: mc9 front cap
Post by: gumpy on May 27, 2014, 05:56:35 PM
Are you talking about an R&M cap, used when you raise the roof?

If I were doing it again, I would not buy the R&M stuff, other than maybe the rear cap. I'd reuse the front cap off the bus, and just fill in the raised area below with aluminum or other material.
Title: Re: mc9 front cap
Post by: jmblake on May 27, 2014, 06:04:51 PM
I did like Gumpy suggested and used the old cap and filled in with aluminum (https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fi630.photobucket.com%2Falbums%2Fuu30%2Fjmblakebus%2F100_1354.jpg&hash=bad8f54324b9652465fe843940b7c05016a41cfc) (http://s630.photobucket.com/user/jmblakebus/media/100_1354.jpg.html)
Text only | Text with Images