BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Scott & Heather on May 19, 2014, 08:16:26 AM
Trying to work down a list of coach work this summer and I'm stuck wondering what the thread size is on the water temp sensor wire stud. I'm missing the nut and want to buy a new one but don't know what the size is. This is for the water temp sensor curbside, 6v92 turbo NON DDEC (mechanical). Here's a pic of the stud I'm talking about:
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fimg.tapatalk.com%2Fd%2F14%2F05%2F19%2F3u4era9e.jpg&hash=8cb85c0066f5d4e7b041668b9e9a0a1bac02a3c6)
Sent from my iPhone using Tapatalk. Clumsy fingers may contribute to mistakes.
Looks like 10-32
They are frequently 10-32 but just as many aren't. it looks like there's a nut still on there that you could remove and take to the store with you....
Take the nut off, only supposed to be 1 nut a fiber and copper washer on the sending unit
That but it is stuck on there. The whole dealy spins. I spent an hour trying to get it off
Sent from my iPhone using Tapatalk. Clumsy fingers may contribute to mistakes.
If the whole dealy(center) is spinning it's time for a new sensor that one won't be any good
Much thanks! It was indeed 10-32. You guys are invaluable.
Sent from my iPhone using Tapatalk. Clumsy fingers may contribute to mistakes.
Cliff, just read your reply. Bummer...super bummer. Ok. Who do I call and what part number do I order?
Sent from my iPhone using Tapatalk. Clumsy fingers may contribute to mistakes.