BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: solow58 on May 14, 2014, 06:13:47 PM
Just replaced side sash weather seals rain seal as well as window to body! Cleaned everything made sure to spray soap water on the outer seal so it would slide on body and took pick to make sure straight! Still getting water inside. Seams to be still getting water buy seal it's filling up window and can't get out to out side only inside. Anyone have any help?
If it makes you feel better, my 4106 has the same leak. I've tired just about everything.... it's a tiny little leak, ever so slow.... New seal, RTV, I'm at a loss.
Sorry to keep at this but, not sure if I done something wrong with installing the seals. All of the windows are letting water in and not out, the window are filling up and draining inside. Do any of you know if the original weather strip have drain reliefs cut in the bottom of weather strip on the window sash to let water that gets in get out. I hate to do the rest of conversion until I or we can solve this Thanks Solo58
solow (NAME??) -
You might want to give Luke a call and see if he remembers which way those seals are supposed to be installed. Perhaps you have them in backwards. . . 1-888-262-2434 is his toll-free number in NJ.
FWIW & HTH. . .
;)
RJ bought seals from Luke installed with his directions.think I will just cut some reliefs in them.I see that you give info on buses could you syfer 4104-3272 would like some info! Thanks Solo58