BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Mike in GA on April 14, 2014, 11:51:32 AM
Recently installed the see-through Fleetguard Fuel Pro Series 230 filter on the 8v92 TA.
Big improvement over the standard two spin-on filter operation that came standard.
Time to change the Fuel Pro filter element. I see from the Fleetguard website that there are several choices for the filter element, ranging from 2 microns, through 7, 10, 25, and even 50 microns.
Which filter rating is recommended for our type of use?
Thanks in advance!
Mike in GA
DD says nothing above 12 but most use the alternate 5 microns for the 8v92 per DD
good luck
Thanks Cilfford. Is that 5 micron flilter a Fleetguard Fuel Pro, or some other brand?
Cheers!
Mike in GA