Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Jim Eh. on March 23, 2014, 05:11:33 PM

Title: MCI 9/12 Gear Selector panel relocation?
Post by: Jim Eh. on March 23, 2014, 05:11:33 PM
Has anyone info or experience on relocating the auto trans gear selector panel from the tower mount beside the drivers seat to a dash mount location?
Title: Re: MCI 9/12 Gear Selector panel relocation?
Post by: RJ on March 23, 2014, 05:44:10 PM
Haven't seen it moved to the dash, but have seen it moved to the left of the driver.

FWIW & HTH. . .

;)
Title: Re: MCI 9/12 Gear Selector panel relocation?
Post by: lostagain on March 23, 2014, 07:34:21 PM
Like RJ says, to the left is quite common. If it is a cable, or wires, they probably need to be longer.
Title: Re: MCI 9/12 Gear Selector panel relocation?
Post by: bottomacher on March 25, 2014, 07:39:52 AM
You'll need a longer cable and a lot of patience (beer?). Cables are usually available through marine suppliers.
Text only | Text with Images