Anyone have a spare one or two?
What are we talking about the push rod with the square nut ? did you bend 1 or 2
No bend, it broke at the threads just where it joins the square section.
(https://lh3.googleusercontent.com/-JrY766ZX7ig/Uxu4znpVscI/AAAAAAAAWWI/ssfb7Wt56gc/s512/IMG_8609.jpeg)
I have plenty the problem is I am 1400 miles from the shop and won't be close till the end of next week,the 71 series are the same if some one here has those,all 3 rods are the same just the injector rocker arm is different fwiw 5128640 is the number a new one is 8 bucks for the rod and $.32 for the nut from PC Industries
Story of my life!
I found these for him: http://www.ebay.com/itm/K-C-Parts-K5128640-Box-of-6-Detroit-Injector-Push-Rod-/300580014669?hash=item45fbf70a4d&vxp=mtr (http://www.ebay.com/itm/K-C-Parts-K5128640-Box-of-6-Detroit-Injector-Push-Rod-/300580014669?hash=item45fbf70a4d&vxp=mtr)
But its kinda vague on what those fit.
Those are the right rods pay no attention to the letters in front of the numbers the after market manufactures always add letters
good luck
So, to clarify, I can grab those rods on ebay and be good to go? I thought I read somewhere they were for a 3-53.
The parts books show the 53,71 and 92 series all use the same push rod
Got it, thank you for your help!