Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: johnjem on January 25, 2014, 10:03:54 PM

Title: Looking for a rear camera shroud!!!!
Post by: johnjem on January 25, 2014, 10:03:54 PM
If u know where to get 1 , or u have 1 laying around let me know .thanks johnjem84@yahoo.com
Title: Re: Looking for a rear camera shroud!!!!
Post by: blue_goose on January 26, 2014, 04:38:29 AM
B & B In Las Vegas used to make them.  Don't know if they still do or not.
Jack
Title: Re: Looking for a rear camera shroud!!!!
Post by: luvrbus on January 26, 2014, 04:58:37 AM
R&M FiberGlass in Turner Or sells the pod or Richard will make whatever you like @ a price  ::)
Title: Re: Looking for a rear camera shroud!!!!
Post by: Utahclaimjumper on January 26, 2014, 05:17:40 AM
 Not difficult to make from sheet metal.>>>Dan
Title: Re: Looking for a rear camera shroud!!!!
Post by: lvmci on January 26, 2014, 06:25:09 AM
Hi John, saw one sitting on the shelf at B&B couple months ago, may be more with all the buses they are breaking down, click on the add at the banner above, Gary Bennett, lvmci...
Title: Re: Looking for a rear camera shroud!!!!
Post by: goutoe on January 26, 2014, 10:07:19 AM
I saw one that a guy made out of a clothes dryer vent, didnt look too bad.>>>> John.
Title: Re: Looking for a rear camera shroud!!!!
Post by: Taibob on January 26, 2014, 10:07:52 AM
 
 John,
I used white plastic dryer vent with grille
Mounted the camera and screwed the cover over it, cut out the grille  to fit the camera. Grille is removable for cleaning or adjustments.
Also paintable. Talk about nice and cheap [<$10]

HTH      Bob
Title: Re: Looking for a rear camera shroud!!!!
Post by: Stormcloud on January 26, 2014, 10:15:12 AM
Ditto on the dryer vent.
Title: Re: Looking for a rear camera shroud!!!!
Post by: lvmci on January 28, 2014, 10:19:25 AM
Hi John, was at B&B last week, saw 4 camera shrouds, there may be a different kind still, this one is dusty, about 6"X15", it has a lip on top of where the lens cutout is, to protect from sun and exhaust and it has masking tape and dirt all over it, lvmci...
Text only | Text with Images