Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Aussiecoach on December 31, 2013, 05:19:05 PM

Title: PIDs for C12 Cat and 10sp Autoshift
Post by: Aussiecoach on December 31, 2013, 05:19:05 PM
I have been sniffing around the C12 and Autoshift with my Silverleaf and was wondering if anyone has a list of the PIDs for them

I am interested in Know what PIDS 194 and 226 on the engine are and what they tell me?

I also get these errors
ENG PID   111  2 Coolant Level                  Invalid Data     12/26/13 12:39
ENG SID   253  2 Calibration Memory             Invalid Data     12/26/13 12:39

Can anyne tell me what these are telling me and how I fix em ?

Thanx
Glen
Title: Re: PIDs for C12 Cat and 10sp Autoshift
Post by: luvrbus on January 04, 2014, 04:47:49 AM
Glen, if the coolant level is correct and all grounds and the voltage are correct the sensor is corroded or bad for 111 the 253 code is a ECU problem most likely the software have Cat install the latest version and that will go away it always did on my Cat equipment  

The 194 is a transmitter code and is always there on a Silverleaf from the J1587 and it picks up the 226 as a overspeed code why I have no idea , I have friend with  C-15 with the Glass Dash in a Newell his does the very same

good luck
Text only | Text with Images