Hmmm......My bus has seperate tail, stop, and turn signal fixtures. I want to use a fixture on my toad that just uses a single bulb like a 1157 configuration for the tail/stop/turn signal. How do I make that transition? thanks
You can buy an adapter at anyplace that sells hitch hardware, even Walmart I think.
Len
I originally had my car (MB Turbodiesel) wired for lights, but with the diodes, adaptors and such, never was able to get it working correctly. So I bought two sets of magnetic LED lights. I used a 5 prong plug and wired the lights myself. It takes all of about 5 minutes to set it up. Now my car lights duplicate the bus lights and if I have to tow anything else, have the lights ready to go. And of course they work right since I did all the work myself (or it always seems to be that way when someone else tries to do the work for you). Good Luck, TomC
http://www.gumpydog.com/bus/MC9_WIP/Electrical/Tail_Light_Converter/tail_light_converter.htm
email or call if you have questions.
craig
Quote from: Len Silva on December 04, 2006, 04:28:36 PM
You can buy an adapter at anyplace that sells hitch hardware, even Walmart I think.
Len
Sorry Chuck, I didn't pay attention to the "MC8". Since you need to convert 24v to 12v as well as separate stop/turn to combined stop/turn, Gumpy's relay system is the way to go.
If you had a 12v coach, the adapter would be all you needed.
Len