Well getting a start on a home base for Coffee's Magic Bus. It was a mudder yesterday so they will have to wait on the Galvalume for the roof and left side. The neighbor furnished the view of the meadow.
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fwww.helpusanetwork.com%2Fimages%2Fhosting%2Fhomebase001.jpg&hash=a1ff97b703a0c1eed59dd04d6460e64453119de1)
I am so glad I bought a MCI, You Eagle guys have to build a garage for your's must be because of the Rust, LOL ;D
Dave5Cs
Doyle;
I believe you will find that a "Bus Barn" (sorry Coffee) is one of the best things you could do not only for the Eagle but for you. I don't know how I'd have been able to do all the things to my GM that we've done without a real facility. I know all the work you've done on your rig and it will be nice to give it a just reward.
Yep Mickey he is doing OK for a mooch lol I had to say that Doyle, I don't see my parking cover anywhere ? but that is OK as long as you pay at the steakhouse it is worth a trip to Carmine just to eat
Some bus nut have 2 facilities to work on their buses Mickey and Doyle do ;D
Dave, all the steel came primed with a special Eagle "rust" tint!
Mike, you're so right... getting it out of the sun will be great.
Quote from: luvrbus on September 29, 2013, 10:35:24 AM
.... I don't see my parking cover anywhere ? but that is OK as long as you pay at the steakhouse it is worth a trip to Carmine just to eat
Clifford, No cover, but always a spare 50amp service and always a great chicken fried steak at JW's waiting with your name on it!
Clifford,
You wouldn't need a cover here in Utah. I'd move the "Red Rider" outside for as long as you might need space. Sorry, I don't have anywhere near the tools you do but you'd be welcome to the ones I have.
Looking good Doyle - I'm jealous.
You guys hit on my favorite subject GARAGE,, I had a 40' X 60' heavy metal garage built with 14' X 14' doors and a 7" min concrete floor with 4,000 lb mix with rebar and fiber mesh, only took 72 yards plus 24 yards for the entrance slab.
Very pleased with the quality of workmanship, finish etc. Now I park the RV in it, and spend half the day in it doing paper work and napping. ;D
At 71, things take a different angle.
50 amp service and Directv dish on roof, water etc. Never over 80 nor under 55f. Soft life.
Nice dog house for Coffee.
We built a 30 x 50 16' side wall 'shop'.
It is not that Eagle owners need to stay out of the rain it is just that after the smooth ride to get there why rough it and tough it out in to weather.
Ours is near our daughter and family so it is nice to have weather Kansas seems to get the rough weather.
LeRoy
Liberty a 1967 Eagle 01
8V71 Allison 740
Here's the Galvalume up
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fwww.helpusanetwork.com%2Fimages%2Fhosting%2Fhomebase004.jpg&hash=0b53115c764866367db620e7e9889bee136aab44)
Gotta do more base work, then a concrete slab.
Doyle, the garage looks great.
How deep is you install the steel posts in concrete or did you pour piers with metal bolt pads? Did you have someone engineer your side loads against wind? Just curious to see the wind rating.
It's galvalume, if it gets too windy it'll ventilate itself :D
The piers are 6' x 12" augered holes with a 18"x18"x6"' cap formed at the top. Filled with concrete and 1/2 rebar Imbedded are 1/2" steel plate 12"x12" welded to J-bolts that are 1/2" x 24" rebar. Columns are 4x4x1/4" square tubing with 4 beads of weld to the 12"x12" plates.
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fwww.helpusanetwork.com%2Fimages%2Fhosting%2Ffootings-001.jpg&hash=8f17c64b97370724829de1b7001962e8a1d16d21)
It's not engineered except by a couple of neighbors that say "Yep, that ought to work." That's the way it's done here ;D ;D
It's surrounded on 3 sides with some pretty dense 30' cedars so I'll keep my eyes crossed for good luck.
Okay, now let every expert chime in..... that's no way to build a martini!
It'll never work. First big snowfall and down she goes.
You heard it here first.
Does it freeze where you are? Up here, if we poured a cap like that on top of the column the first winter would lift it about an inch out of the ground, but if it doesn't freeze you should have no issues. We either pour in sono tube 6" to a foot above ground level minimum, or stop the column 6" underground and imbed a galvanized post or something. As you say, the aluminum siding will self-ventilate ;D and the posts will still be there in the morning. Nice to see a new bus home!
Brian
Enclose one end at least. Tin screwed together makes them stronger in wind.
Doyle just what part of the country you in?
My last week in Viet Nam we had a typhoon come thru our base and do a lot of damage. When i got to the airfield to fly out i saw a hanger that was built with 1ft. steel i-beams and tin sheeting. On one end the tin on the roof was gone and the end i-beam that was canter-levered out for the roof had a 1/4 twist in the middle of it just like a giant had grabbed it in his hands and twisted it. There were 29 helicopters there that were destroyed,.....a rotor here, a tail rotor there, a chunk of fuselage in-between or whatever. Rained so hard that you could not see more than 30 ft at the most, and the rain was going parallel to the ground.
nothin' wrong with jerry- riggen' it always works ! permits are for taxes its better to beg for forgiveness then ask for permission dave
Sledhead,
SOO correct on your posting, we all have had issues of some sort, our biggie was a 150' Ham Radio tower, long story short, I built it, the inspecter later says boy you must get good TV reception ! TV antenna are exempt or were here. Code book is not clear, so I just did it. ;D
Looks nice, but to me doesn't look stout enough to with stand a high wind. Need some angled cross members for reinforcement. Good Luck, TomC
Gee guys I am sure his structure is engineered for his location or they would not gave him a permit in that county just about every place requires a engineers stamp on a metal structural for wind
I know where he is located wind is not a big factor but nothing is engineered for a category 5 tornado
good luck
Cliff, out in country here in texas (100 acres) you build what you are big enough to build. No permits, inspections or folks telling you No!
I live in the country here also but they are strict on metal buildings and wind rating
We have a place in Anahuac Tx on the coast in Chambers county I been fighting for 2 years for permit on a 40x60 metal building there.
Like you say some counties in Texas are easy for a long time when we lived in Conroe the Montgomery county was anything goes not that way there now in Montgomery County it's all about revenue
The Texas Gulf Coast has always been tough and for good reason with hurricane winds blowing though. We tried to get a Bus cover built in Surfside Tx. and found out you can't even tie in your RV overnight to your house unless you have a permit and then just a few days and have to move it, Only 4 or 5 permits a year.