Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: TexasBorderDude on July 28, 2013, 12:41:38 PM

Title: What is it?
Post by: TexasBorderDude on July 28, 2013, 12:41:38 PM
I had a fellow fix a mounting strap on my muffler and then down the road I had occasion to look at it and saw this.

What the heck is that on the rear motor mount cross member on my 05 Eagle?  Looks like some kind of breather???


(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fwww.helpusanetwork.com%2Fimages%2Feagles%2Fmystery001.jpg&hash=ea8ff8e9106d2c895e5a52e486f4a74bc572ba39)
Title: Re: What is it?
Post by: Hobie on July 28, 2013, 12:51:57 PM
so that's where I left my oil breather cap off my '68 Chevy..
Title: Re: What is it?
Post by: Dave5Cs on July 28, 2013, 01:00:18 PM
That my friend is the proverbial Muffler Bearing!.....Your welcome glad i could help. ;D :D ;)

Dave5Cs
Title: Re: What is it?
Post by: Nusa on July 28, 2013, 01:16:30 PM
Is it magnetic? If so, I'm thinking it was used to hold parts together for welding. Left behind by mistake.
Title: Re: What is it?
Post by: expressbus on July 28, 2013, 01:29:48 PM
Mr. Gasket Oil fill breather cap for puny little Chevrolet 265-283-327 engines, but even better yet 301-331-354-392 Chrysler HEMI's!
Title: Re: What is it?
Post by: bobofthenorth on July 28, 2013, 01:44:33 PM
Just a WAG but it looks like Clifford's handiwork.   He likes to box those tubes in and use them for a slobber tube reservoir.
Title: Re: What is it?
Post by: boxcarOkie on July 28, 2013, 02:15:45 PM
Can't be a Iggle part ... there isn't any rust on it.

BCO-CTA
Title: Re: What is it?
Post by: chessie4905 on July 28, 2013, 02:36:07 PM
It's boxed in for the slobber tube reservoir, so at least that part of an Eagle won't rust out.
Title: Re: What is it?
Post by: muldoonman on July 28, 2013, 03:00:51 PM
chessie, should have put those 2 strokes in front of bus and with all the leaking oil you would never rust, of course you would be slipping and sliding down the road.
Title: Re: What is it?
Post by: luvrbus on July 28, 2013, 07:37:26 PM
Bob guessed it I don't like plastic pipe and gal oil jug people use for a catch can if people are going to use something anyway I just do it that way simple as abc the mount is already tubed 

You buy 3 - 3/8 in black iron pipe coupling,2-3/8 barbed hose fitting weld a fitting on each side of the cross member for the air box drains 1 at the bottom of the cross member for draining you can use a regular pipe plug for the drain or like Doyles I used a Fumoto drain he had 

Then use a hole saw and cut a 1 inch oil on the top stick the breather and rubber grommet in top your done maybe 30 minutes and 20 bucks tops he thinks it is neat now that he knows what it is lol 
Title: Re: What is it?
Post by: TexasBorderDude on July 28, 2013, 07:51:28 PM
Yep, I should have shown this picture too ;)

(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fwww.helpusanetwork.com%2Fimages%2Feagles%2Fmystery002.jpg&hash=bde989329f5cc5f94f3b0e56fc262c15495979a4)

Can't wait for the puzzled looks when they see that muffler bearing, California EPA muffler breather, etc.
Text only | Text with Images