I have a power steering leak on the pump looking for a reseal kit.Does luke carry it,also may need compressor reseal kit! any info would be great thanks john,
Where is it leaking? The seals are on the shaft, and the leak goes back into the engine, so a bad seal would just fill up the sump, not leak externally. Externally there are the input and output fittings and the pressure relief valve. Same with the compressor - a seal leak will put oil back into the engine. Externally there are only hose fittings. Of course the base gaskets can always leak.
Brian
The o-ring on the pressure valve is where most leaks are it takes a special o-ring Parts for Pumps in Tn has the seal kits they where 11 bucks a few years ago probably 20 now lol
If it leaking on top where the hold down pin for valve is located just a o-ring is needed and that repair can be done without removing the pump finding the square o-ring locally is the problem,fwiw that is where most leaks are on a GM
most likly external,thats how i spotted it,pump is just wett,have not started motor in a awhile so i see it just its sepping out,possible onto the compresure as well most likely base or covers on the pump,it is a clear motor oil ,not black (engine oil) or red (tranny oil) i use 10w40 in the power steering!