Anyone have a parts book? and would not mind looking up the #'s for tie rod ends and draglink/drag link ends?
thanks in advance
I don't have an 8 book. However, you might try MCI tech support. They should have all the books and are usually very helpful.
FWIW
John
already went that route...no Joy.
MCI is purging a lot of old stuff.
The part is a vendor part and I am trying to track down the cross reference numbers so we can go direct to source but need the MCI number to start.......my manual went with the bus...and is not handy at this time
I show the drag link end at axle as a 11r-4-4, pitman arm end is a 11r-4-5
cross tube ends are lh 1c-2-62 and the rh end is 1c-2-63
Most of MCI front end parts are made by Euclid the king pins,tie rods and drag links,Dayton,R&S and Moog are your larger aftermarket suppliers for those parts