Print Page - Need a 8v71 for MCI 9

Title: Need a 8v71 for MCI 9
Post by: luvrbus on January 18, 2013, 08:14:59 AM

Have a friend with a bad 8v71 it filled with fuel and spun the rod bearing any body close to Phoenix have a engine

thanks

Title: Re: Need a 8v71 for MCI 9
Post by: Don Fairchild on January 18, 2013, 08:37:31 AM

Clifford, I have a couple of military turboed engines and I might have a crank shaft for one. I could probably find a couple of trunk type rods for his.

Hope that helps

Don

Title: Re: Need a 8v71 for MCI 9
Post by: Jax on January 18, 2013, 09:50:30 AM

I am in Oklahoma, little far, but I have a rebuilt 8v71 in an MC8 I am going to part out.
Jax@cwis.net

Title: Re: Need a 8v71 for MCI 9
Post by: hardonracing on January 24, 2013, 02:11:42 AM

I have a complete Bus in running condition I was going to convert but have since purchased another that has a 8v71 / 740 Allison its a 1982 MCI mc-9 843-469-1501

Title: Re: Need a 8v71 for MCI 9
Post by: hardonracing on January 24, 2013, 02:12:23 AM

FYI... Im a bit far --- in SC

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: luvrbus on January 18, 2013, 08:14:59 AM