Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: baker4106 on July 23, 2012, 03:43:59 PM

Title: ramco mirror base
Post by: baker4106 on July 23, 2012, 03:43:59 PM
Does anyone have the bases for a Ramco mirror to mount them on a 4106?
Title: Re: ramco mirror base
Post by: Slow Rider on July 27, 2012, 06:27:04 PM
Bump
Title: Re: ramco mirror base
Post by: viento1 on July 29, 2012, 03:42:56 PM
any luck? I may be able to help you as I believe the one I have will fit.
Title: Re: ramco mirror base
Post by: baker4106 on July 30, 2012, 04:40:38 PM
No luck.   Ramco has discontinued it.   What does your base look like?
Title: Re: ramco mirror base
Post by: Utahclaimjumper on July 30, 2012, 07:16:05 PM
Many years ago when I owned a 62 4106,, I replaced the stock GM mirrors and bases with RAMCO. I found then that the bases were almost identical to the stock GM bases. Might be worth a second look.>>>Dan
Title: Re: ramco mirror base
Post by: baker4106 on July 31, 2012, 04:57:19 PM
My GM bases won't fit the Ramco mirrors.   My GM bases have a bolt sticking upright from the base and the Ramco mirrors must have a bolt installed from the bottom of the base into the mirror.
Title: Re: ramco mirror base
Post by: crown on July 31, 2012, 05:13:03 PM
 baker you can make the gm bases work i used a set of gm bases for my 57 crown what i did was i cut the gm bolt off flush and on the bottom of the base used a hole saw to make a hole to put the bolt through then drilled a new hole through the cut off bolt now you have a custom fit base i can take pictures if you need
to see it i bought many bases and none fit john
Text only | Text with Images