Print Page - 6v92 water pump

Title: 6v92 water pump
Post by: christopher on July 21, 2012, 12:02:03 PM

anyone know how to rebuild? is it diificult. Mine is leaking out the weap hole in the back. Its probably a seal.
Thanks
Chris
mci5c

Title: Re: 6v92 water pump
Post by: luvrbus on July 21, 2012, 01:26:36 PM

The seal can be installed without removing the pump to replace a worn shaft you remove the pump not a hard job if you follow the BOOK

About a all day job to remove the pump and do a complete reebuild which I would do if you plan to be with the bus for the long run then you can replace the short hoses that go bad and leave you on the side of the road lol

A reulid kit will cost you 125.00 + depending where you buy fwiw

good luck

Title: Re: 6v92 water pump
Post by: thomasinnv on July 21, 2012, 07:54:21 PM

rebuild kit at mohawk $89

I bought all the parts ala cart when I did mine because they were out of stock on the kit. I ended up getting all the pieces you would get in a kit, plus a new shaft and bearings for around $60. Go figure, the kit costs more than buying the individual parts.

Title: Re: 6v92 water pump
Post by: luvrbus on July 21, 2012, 08:02:33 PM

I tried one of those 80 dollarTaiwan kits from Mohawk you were luckly they were out of stock Derrick lol

good luck

Title: Re: 6v92 water pump
Post by: thomasinnv on July 21, 2012, 08:06:05 PM

Clifford, I got decent parts ala cart, but I would imagine the kit is a different source like you say. Just gotta be careful what you get I suppose. Where you at these days? still working on your son's hummer?

Title: Re: 6v92 water pump
Post by: christopher on July 22, 2012, 06:08:21 AM

anyone have a copy of the pages from da book to rebuild this pump that they can pdf to me
Thanks
Chris

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: christopher on July 21, 2012, 12:02:03 PM