Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Tenor on June 27, 2012, 02:11:23 PM

Title: MCI 7 Power steering
Post by: Tenor on June 27, 2012, 02:11:23 PM
On the reservoir for my power steering, there is a lid.  In the lid is a small threaded fitting, 1/8 pipe I think.  It has no plug.  Should it?

Thanks!

Glenn
Title: Re: MCI 7 Power steering
Post by: Stormcloud on June 27, 2012, 04:03:47 PM
No plug. It is the vent. Mine was also missing, so I put some light foam mesh over it and ty-wrapped it.
Title: Re: MCI 7 Power steering
Post by: Tenor on June 27, 2012, 05:23:45 PM
That's what I thought Stormcloud!  I used a hose fitting and a short bit of hose in a loop.
Text only | Text with Images