BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: rayshound on November 04, 2006, 01:43:22 PM

Title: looking for interface module
Post by: rayshound on November 04, 2006, 01:43:22 PM
    I am hooking up a series 60 to an allison ATEC 748.  I need a maximum feature throttle interface module. The DD application & installation manual calls it out so the transmission  will send a s signal to the S60.  It is for the throttle position sensor and the speed pick up. I have the ddec & the Atec manuals they show it for the DDEC 2 & the DDEC 3& 4 which is what I have (4) I went to Stewart & Stevenson the dd dealer with my manuals and they cannot find a number to call the module up. One little square with 4 plugs. I also have an interface box made by DMR they make a interface box that gives you a break out of the ATEC with remote relays for idiot lights, nutral safety, b/u lights etc but they don't offer this throttle interface. Any Ideas? Thanks Ray
Title: Re: looking for interface module
Post by: RTS/Daytona on November 04, 2006, 03:30:15 PM
Quote from: rayshound on November 04, 2006, 01:43:22 PM
    I am hooking up a series 60 to an allison ATEC 748.  I need a maximum feature throttle interface module. The DD application & installation manual calls it out so the transmission  will send a s signal to the S60.  It is for the throttle position sensor and the speed pick up. I have the ddec & the Atec manuals they show it for the DDEC 2 & the DDEC 3& 4 which is what I have (4) I went to Stewart & Stevenson the dd dealer with my manuals and they cannot find a number to call the module up. One little square with 4 plugs. I also have an interface box made by DMR they make a interface box that gives you a break out of the ATEC with remote relays for idiot lights, nutral safety, b/u lights etc but they don't offer this throttle interface. Any Ideas? Thanks Ray

Ray

I have a .pdf file of that mystery 4 wire black interface box - ddec to atec interface - only has 3 components (diode 52k resistor and a 2.2 uf capacitor - but the file to big to attach and display  call me 386.672.0571  also have more info on "max throttle" feature

Pete RTS/Daytona

Title: Re: looking for interface module
Post by: RTS/Daytona on November 04, 2006, 03:45:26 PM
let's try this again

scanned in as .pdf - converted to .jpg - make smaller
Title: Re: looking for interface module
Post by: rayshound on November 05, 2006, 12:14:18 PM
Pete thanks for the circuit, I will give you a call.  Ray
Title: Re: looking for interface module
Post by: twragg on August 29, 2008, 08:17:49 PM
Did you get your interface module?  I am trying to hook up the cruise control circuit on my ddec 3 that requires a MAXIMUM FEATURE throttle interface module.  I found one at General Diesel Electronics.  Tom
Title: Re: looking for interface module
Post by: NJT 5573 on August 29, 2008, 08:44:57 PM
GDE has got it all. 218-262-4553. Its all they do. Next day if you want.
Title: Re: looking for interface module
Post by: luvrbus on August 30, 2008, 07:48:00 AM
hey guys Ray ask that question about 2 years ago
Title: Re: looking for interface module
Post by: Bob Gil on August 30, 2008, 08:27:14 AM
Here is proof that some one is looking into the archives and getting more info for our reference.
Title: Re: looking for interface module
Post by: luvrbus on August 30, 2008, 08:44:46 AM
you are right Bob these guys never give up trying to help fwiw Ray sold that bus sometime back