Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: mikelutestanski on June 03, 2012, 04:39:54 PM

Title: CLeaning midland pure air plus dryer
Post by: mikelutestanski on June 03, 2012, 04:39:54 PM
Hello       Doing maintenance on the midland grau   pure air plus air dryer. Found the inlet side with lots of gray gook.   Combination of water and oil I guess.
    I have the rebuild kit but I need to clean the bottom inlet out.  THe directions say no aeromatic solvents so that lets out most . I wonder if a water rinse and air blow dry would do the trick? 
   Regards   mike
Title: Re: CLeaning midland pure air plus dryer
Post by: luvrbus on June 03, 2012, 05:05:05 PM
I use a hand cleaner solution with water fwiw not Go/Jo about all waterless hand cleaners are non aromatic
Title: Re: CLeaning midland pure air plus dryer
Post by: mikelutestanski on June 03, 2012, 06:33:07 PM
Hello   Sounds  good  thanks for the info.    regards   mike
Title: Re: CLeaning midland pure air plus dryer
Post by: Utahclaimjumper on June 04, 2012, 03:12:59 AM
Mike,, do not re-assemble with out replacing the "turbo valve" in the bottom of the unit. This valve is the source of most problems with the Midland, and this valve has been upgraded to a better design.<<<Dan
Text only | Text with Images