BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: somewhereinusa on May 31, 2012, 10:47:48 AM
I have a couple of turnsignal/marker lights that are in quite nice shape, but the rubber gasket is gone. Bluebird no longer stocks it, they want to replace whole assy at over $90 a pop. The old gasket is a u shaped deal that goes around the socket assy and is the seal for both the assy and the lens. It's made by a German company R & S. I've not hand any luck with any searches. Anyone have any suggestions on how to make or find something suitable? I've included some pics including numbers stamped on back and a detail of the gasket. Thanks in advance.
Dick
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fi69.photobucket.com%2Falbums%2Fi79%2Fsomewhereinusa%2FOur%2520bus%2Fweb-turn-signal-details.jpg&hash=27b2dd270b7ed48beb0241f315bbd496d52c6691)
Buy the foam gasket tape and make those not really hard to do