BCM Community

I had a light circuit fail on a set of house lights and checked the fuse.  A portion of the fuse block was melted and I can't even remove the fuse.  The block is made by Apex which I can no longer find.  I've had trouble with these blocks before.  They are six ganged fuses feed by a #6 awg wire back to my 12v buss bar.  I found a replacement.

http://www.wiringproducts.com/contents/en-us/p525_raised_ganged_fuse_block.html (http://www.wiringproducts.com/contents/en-us/p525_raised_ganged_fuse_block.html)

This is very similar and will work with a bit of modification.  All my 12v branch circuits are push on spade terminals.  This block in the link is ring terminal.  Anyone have any source for a spade terminal block?

Thanks,
David

Something like this?
http://www.summitracing.com/parts/RNB-60232 (http://www.summitracing.com/parts/RNB-60232)

Steve

Look at Dell City wire and West marine.  Sorry I don't have the URL's but they should be an easy Google search.  I use Dell City in my business and have been very happy with them.  They are also a good source for battery cable size wire and  terminals.

Art

Or this

http://www.jamestowndistributors.com/userportal/product.do?part=68205&SHOPPING# (http://www.jamestowndistributors.com/userportal/product.do?part=68205&SHOPPING#)

or this

http://www.summitracing.com/parts/HLA-H84960111/ (http://www.summitracing.com/parts/HLA-H84960111/)

Also try here.


http://order.waytekwire.com/products/M50/140/350/250/1 (http://order.waytekwire.com/products/M50/140/350/250/1)

I ordered six of these today. 

http://www.wiringproducts.com/contents/en-us/p525_raised_ganged_fuse_block.html (http://www.wiringproducts.com/contents/en-us/p525_raised_ganged_fuse_block.html)


I'm going to replace all six of the Apex fuse blocks.  I have no confidence in their integrity. 

I'll post back after I get them all changed out.

David