Print Page - Need MCI-9 Bay Measurement

Title: Need MCI-9 Bay Measurement
Post by: Kwajdiver on April 05, 2012, 03:40:29 PM

To you MCI-9 owers.

I'm trying to order a battery slideout to fit in my cargo bay. One side of the bay has the gen set. As some of you know, I'm away from my bus. Would like to order the slide so it's home when I arrive.

I need a measurement for half of the bay in order to order the slide.

Thanks for the help.

Bill Willamson
This coach is for sale

Title: Re: Need MCI-9 Bay Measurement
Post by: Scott & Heather on April 05, 2012, 04:02:58 PM

Hi Bill. Going out to measure right now...give me a few minutes...

Scott

Title: Re: Need MCI-9 Bay Measurement
Post by: Scott & Heather on April 05, 2012, 04:09:58 PM

1. Measuring from the side of the air line/accessory channel to the INSIDE of the baggage door latches is 29 inches. (34 to edge of bay)
2. Measuring from UNDERNEATH air line/accessory channel halfway to the INSIDE of the baggage door latches is 33 inches (38 to edge of bay)

Is that clear? Hope so...

Title: Re: Need MCI-9 Bay Measurement
Post by: Kwajdiver on April 05, 2012, 06:57:13 PM

Scott,

Believe that will do it.

Thanks alot.

Bill

Title: Re: Need MCI-9 Bay Measurement
Post by: Scott & Heather on April 06, 2012, 12:43:06 PM

Sure thing!

---
I am here: http://tapatalk.com/map.php?plkykf

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Kwajdiver on April 05, 2012, 03:40:29 PM