BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: natepelton on March 12, 2012, 08:33:00 AM

Title: Prevost entrance door window
Post by: natepelton on March 12, 2012, 08:33:00 AM
Greetings-
Wondering if anyone has a source for these windows other than Prevost? I think they are about $300 from them and just looking for a less expensive alternative.
Thanks-
-Nate
Title: Re: Prevost entrance door window
Post by: Busted Knuckle on March 12, 2012, 11:00:57 AM
Quote from: natepelton on March 12, 2012, 08:33:00 AM
Greetings-
Wondering if anyone has a source for these windows other than Prevost? I think they are about $300 from them and just looking for a less expensive alternative.
Thanks-
-Nate

Nate don't go on hearsay when it comes to "Prevo" parts. Many times I (& others have found them to be really reasonable on many parts that someone had led me to believe otherwise!)

Call Prevost or check out their website to be sure.
;D  BK  ;D
Title: Re: Prevost entrance door window
Post by: fraser8 on March 12, 2012, 11:06:43 AM
Check Prevost out, I've received parts from them that are a lot less than other places have quoted and Prevost included freight. Their parts department is really helpful. You can check on line.
Title: Driver's side fixed
Post by: DKO on March 12, 2012, 11:35:31 AM
I just replaced the fixed part of the driver's side window. It cost $242 for the window from Prevost.

DKO
Title: Re: Prevost entrance door window
Post by: Gerry H on March 14, 2012, 06:39:37 AM
Nate: I am looking to replace my 1992 driver's window (fogged) first cause it's the worse of the two windows. I have the thermos (2 insulated panes) type which is $265 from the Prevo website. I asked around some of the local glass shops and was told most don't want to deal with thermos plexiglass/Lexan due to seal failure likelyhood. I've seen them used in mobile homes and fail, but someone obviously makes them for Prevo and mine's lasted 20 years. So rather than try to save a dollar and gamble with possibly less of a quality product, I think for me, it will be Prevo Parts. Good Luck Gerry H