I just received a 3000 watt inverter Model AL25-160 has three cables coming out a green ground, red + and a black+ open up case black comes from B+ red from A+ is this made for two battery banks. anybody that has a schematic I would appreciate a copy or if anybody knows anything HELP please.
Larry H
call expert auto electric 800 426 2838
Larry, those two ratings would suggest to me that they are for the AC and DC outputs, respectively. The first while inverting and the second while charging. I think that you might have found the battery leads if they are 3/4 to 1 inch thick. If that's the case, you still need to look for your AC connections inside of the connection box.
The good news is that there is probably an automatic transfer switch inside for seamless operation.
I didn't find anything through Google, so the information is scarce.
Good luck.
Tom Caffrey
Suncatcher
Ketchikan, Alaska
Tom I know I founf the battery cables what has me stumped is the two positive hot leads AC is standard 12 gauge wire and the remote connection is 14 gauge wire the only thing I can logically think it charged house batts seperate from vehicle battery.
somebody must have a diagram out there
LarryH
Go to www.vanner.com they purchased Dynamote, email support and they should be able to help you.
Mark
Mark thank you
I have emailed Vanner co will see if I get any response out of them.
LarryH
I found this:
Dynamote Corp.
14842 Densmore Ave. N.
Shoreline
WA 98133
Phone: (206) 365-5563
Toll-Free: (800) 426-2838