BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: JOHN LADD on February 13, 2012, 08:46:57 PM

Title: NEOPLAN VOLTAGE
Post by: JOHN LADD on February 13, 2012, 08:46:57 PM
we have a 89 metroliner .we are having trouble with the electric .it has set for a couple of years and it starts ok  but the alt light on dash stays on and the do not shift blinks and  only getting 24.3 volts going into battery getting 25.4 out at  the regulator . book says should be 26.4 and above not sure if the regulator relay or the breaker at the rear junction box is bad .do you know how to check these  .also do you have any of these parts left .thank you so much for any help . ...we have the service manual for the bus but is is not to user friendly    john ladd Fort Lawn SC
Title: Re: NEOPLAN VOLTAGE
Post by: Sean on February 13, 2012, 08:53:21 PM
Not sure what you mean by "out of the regulator."

If you are getting good voltage at the alternator but not at the batteries, you have a bad cable or connection.

Where are you measuring these voltages, and with what?

-Sean
http://OurOdyssey.BlogSpot.com (http://ourodyssey.blogspot.com)
Title: Re: NEOPLAN VOLTAGE
Post by: JOHN LADD on February 14, 2012, 04:37:04 PM
found out that the regulator is bad thanks for all the help..john ordering one tomorrow