BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: somewhereinusa on January 30, 2012, 04:17:12 PM
I got the electric door lock finished and installed today, I think it works pretty cool. Note in the crack between the door and jam you can see the dead bolt move into the door. That just about finishes up all I can do on the door frame until it gets warm enough for paint to dry. It can be actuated either by remote control or a key switch on the outside. There will also be a switch on the inside. While I was at it I removed a lot of wiring that had to do with the flashing lights and side stop sign. Here's a link to the video, I couldn't figure out how to embed it in the post.
http://s69.photobucket.com/albums/i79/somewhereinusa/Our%20bus/?action=view¤t=doorlock.mp4 (http://s69.photobucket.com/albums/i79/somewhereinusa/Our%20bus/?action=view¤t=doorlock.mp4)
Looks good
is there a manual over ride?
Quoteis there a manual over ride?
I have a back door