Been awhile since I posted any updates on our bus, but now that the weather is more suited for working on it, out comes the to do list :o ;D. The one thing I really wanted to get after is the entry way in the front of the bus, and get rid of the factory flooring. I replaced all the decking, and decided to go Laminate. We love it! and the Pooch (Who say's ya can't teach an old dog new tricks ;) ) is even learning how to dance now ;) ;D
But anywho, here is a photo of this past weekend's project.
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fi457.photobucket.com%2Falbums%2Fqq292%2Fcwvanhagen%2FBusentrywaysteps.jpg&hash=bdb280d70b3662874e1141efe36fd47d970a98e7)
Looks good, Van! I'll have to make sure I visit again to see it next time I'm down your way.
Take care,
JC
Thanks JC, I still have to trim the entry side walls as well as the drivers area floor before it is completely done. JC, you know the door is always open, c'mon by! ;) :)
Van 8)
Looking good Van keep Jan open for me Leroy's Eagle (Liberty) needs raising about 3 inches are you up to that lol
good luck
Van, in my crystal ball I see an east coast eagle rally in your future!!! Looks great !! GIT-R-DUN!!!!
EB, Much appreciated! :) Me being all thumbs I was hoping that I was headed in the right direction ;D. Ya know we will eventually come back east, but we were also hoping to see you guys at the Q first ;) ;D Clifford, Sure! I'll see your 3 and raise ya another 3 if you wish :D Jus' lemme know ;) I'm going back to my bus to figure out what to do with the bare stainless in the stair way, more laminate, carpet? Idunno, just wanna make it look tasteful. Where's an interior decorator when you kneed one? ;D
Van, looks really good. Having recently redone our entrance and driving area, I'm curious if the metal is inlaid or setting on top of the laminate or butted against. Inquiring minds want to know ;D Will
WOW WOW Van you the Man ::) Those new seats are going to look real nice in there ;D
Veeeeery nice! See you in Q in January!
Mark and Donna
Quote from: PP on November 21, 2011, 09:14:26 AM
Van, looks really good. Having recently redone our entrance and driving area, I'm curious if the metal is inlaid or setting on top of the laminate or butted against. Inquiring minds want to know ;D Will
Will, the metal stair edging sits on top of the laminate, it did the job nicely as it is 2 3/4'' wide on top and about 1 1/2'' hanging down in front. this will come in handy as I still have to figure out what to cover the risers with, in any case I can move the trim to accommodate what ever I end up using. Incidentally the trim can be had at Home Depot
http://www.homedepot.com/h_d1/N-5yc1v/R-100146344/h_d2/ProductDisplay?storeId=10051&keyword=DS36GAH&jspStoreDir=hdus&Nu=P_PARENT_ID&navFlow=3&catalogId=10053&langId=-1&ddkey=Search (http://www.homedepot.com/h_d1/N-5yc1v/R-100146344/h_d2/ProductDisplay?storeId=10051&keyword=DS36GAH&jspStoreDir=hdus&Nu=P_PARENT_ID&navFlow=3&catalogId=10053&langId=-1&ddkey=Search)
Van
Quote from: Eagle Andy on November 21, 2011, 09:41:43 AM
WOW WOW Van you the Man ::) Those new seats are going to look real nice in there ;D
You bet! Thanks! :) Also on the list (and growing exponentially :o)is the over head cabinetry in the front, can hardly wait ::).
Quote from: Stormcloud on November 21, 2011, 09:59:22 AM
Veeeeery nice! See you in Q in January!
Mark and Donna
Mark we are sure gonna try hard to be down in that area, hope to see you guys again ;)
Van
Looking good Van! 8)
Hope to see ya at the Q!