Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: grantgoold on September 19, 2011, 04:49:38 PM

Title: Glass block!
Post by: grantgoold on September 19, 2011, 04:49:38 PM
Anybody used glass block for a shower wall?

Grant
Title: Re: Glass block!
Post by: Ralph7 on September 19, 2011, 05:40:17 PM
   OH, how are you going to glue them and they get heavy. What about cleaning?  Streaks hope you have lots of glass cleaner/ viniger is cheeeepper.
   But they would  be a great looking.
Title: Re: Glass block!
Post by: robertglines1 on September 19, 2011, 05:44:51 PM
Idea.. have seen them drilled and lights put into them.  just a added idea   Bob
Title: Re: Glass block!
Post by: Melbo on September 19, 2011, 07:51:55 PM
They make blocks out of plastic (not glass block but looks the same) so they would be lighter and you could glue them.

I really like the idea.  I have a LARGE shower in my bus 52 by 36 or so and a half glass wall with tile on the rest with custom inlaid dolpins.

Go for it and then post us some pictures.

Melbo
Title: Re: Glass block!
Post by: tomhamrick on September 20, 2011, 04:46:52 AM
I was thinking that Gene Lewis did that in his Eagle. He should be on here to chime in.
Tom Hamrick
Title: Re: Glass block!
Post by: TomC on September 20, 2011, 07:37:53 AM
Glass block-to heavy and too thick (wastes space).  Good Luck, TomC
Text only | Text with Images