BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: fredcliff on August 26, 2011, 07:06:21 AM
I need 24v back up lights for my 1984 MCI M9. I can I get Little Directions as to where to find them. I have called MCI, Jam Straight,4state trucking, and ll local trucking and Auto store with NO luck. Where do I go? :(
Did you call Luke at US Coach?
These are dual voltage LED lights, you'd have to figure out how to mount them. http://www.grote.com/product.php?product_number=62391 (http://www.grote.com/product.php?product_number=62391)
you need two lights, you could use any pair of 12v lamps in series.
Brian
If you go with incandescent couldn't you just replace the bulb with a 24 volt one?
Luke is off today I have a call into them but they have not returned the call yet
You could take that 24 volt source and run it to signal a 24 volt relay that you can use to then run 12 volt thru it to the 12 volt bulbs..
Kinda the same way you can produce a 12 volt source for the trailer light plug on a 24 volt chassis.
I do this to create a 12 volt brake light signal for trailer brake controlers on 24 volt chassis.
You can also wire two 12v light in series. A buddy of mine did that with his 24v airplane landing lights.
Problem is, if one fails they both go our!!