BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: wal1809 on August 20, 2011, 02:46:42 PM
My tag axle has become pretty rediculous lately with bouncing. If I hit the brakes too hard they start bouncing. I will say this, it is annoying. I mean I try to take the Farm Market roads and I like to ease along so I almost never use my brakes. I only use them for the final part of stopping. I can usually see way ahead and just let the motor ease it's way down until I have to hit the brakes. But in times of need of heavier braking, they bounce.
The bounce is caused by not enough weight on it you need to take it to a shop and have those re-index and get the weight right
you can learn about it on www.eagleinternational.net (http://www.eagleinternational.net) that one your wife will have a tough time with lol have it fixed or it will destroy the drives torques tubes right now the drivers are carrying the weight not good,Sonnie Gray north of Denton will fix those for you 1-903-815-2141 tell him I said charge you double
good luck
Thank you Sir. I will do some reading.