BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Busted Knuckle on July 19, 2011, 08:04:10 AM
Seems I'm having same problem in all my buses went out to start & mkve2 2 different buses and the temp reader in both of them is showing 120 +. So I turned on the heat and let them run an hr. Came back out & they aren't getting any warmer, still shows 120 +. Any ideas what's wrong w/them? Oh yeah tried checking the temp on a 3rd one and it just shows * * * *. I'm @ a loss here never had this happen b4 that I know of.
Bump! ;)
Sure hope you get it figured out. Most of the time we hear of them running too hot!
humidity like runnin water on them
Have the same problem here in North Carolina. Just looked at the thermostat in "HUGGY" it reads 120. I thought Detroit's ran at least 190 to 200.
uncle Ned
Yeah, but I'm talk'n bout the inside temp.
But at least the A/C brought 'm both back down 2 90* in about 15-20 mins.
;D BK ;D
Thats the temp. on the wall thermostat. and "HUGGY" is in the shade
uncle ned
I know it's only in the mid 90's here in Pa., so far my 13,500 roof AC is keeping it 73-77. Hope it keeps working.