Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: BC Bus on July 07, 2011, 11:03:34 AM

Title: Wheel Seal part number cross reference MC 9, GM 4106, 4107
Post by: BC Bus on July 07, 2011, 11:03:34 AM
Does anyone have any non MCI Part numbers, Rockwell, CR, Timken, NAPA for rear drive axle oil seals for a MC 9 and all the related parts to replace the seal.

According to some web sites this is the same seal as the GMC 4106 4107

The MCI number for the seal is 15R-3-8 .
Title: Re: Wheel Seal part number cross reference MC 9, GM 4106, 4107
Post by: Tom Y on July 07, 2011, 05:32:53 PM
CR 45010 is the seal.  Tom Y
Title: Re: Wheel Seal part number cross reference MC 9, GM 4106, 4107
Post by: Just Dallas on July 07, 2011, 05:37:59 PM
Napa number: NOS 45010
Title: Re: Wheel Seal part number cross reference MC 9, GM 4106, 4107
Post by: BC Bus on July 07, 2011, 05:45:33 PM
Thanks guys..I had a rockwell and stemco number but both of yours will really help.

Great board !
Title: Re: Wheel Seal part number cross reference MC 9, GM 4106, 4107
Post by: zubzub on July 07, 2011, 06:59:41 PM
Are 4104  #s the same?
Title: Re: Wheel Seal part number cross reference MC 9, GM 4106, 4107
Post by: Just Dallas on July 07, 2011, 07:15:32 PM
Nope.

Scotseal 44964

Quote from: zubzub on July 07, 2011, 06:59:41 PM
Are 4104  #s the same?
Title: Re: Wheel Seal part number cross reference MC 9, GM 4106, 4107
Post by: zubzub on July 07, 2011, 11:43:48 PM
Thank you.
Title: Re: Wheel Seal part number cross reference MC 9, GM 4106, 4107
Post by: Ralph7 on July 08, 2011, 05:28:34 AM
 The  CR 45010 rides tooooo far in on the axle.(wiper).. --- I JUST INSTALLED THE 44964, also ----- I have a National  seal 370022A ----    AND if the wiper(on axle) is damaged it needs changed(PITA)  job .. The WIPER looks like it the housing, but is driven on.
  The   45010 on my left drive does not leak  but the right has a very slight taper??? cause I lost 2 seals!
  The 44964 seal does not go in far on the wiper, took hub off and there is a difference in depth of seal, the 44964 axle seal that sits on axle sits closer to the bearing.
  At this time I have a 45010 and a National 370022A  PLUS a wiper . will get  another 44964 . NO I am not a ????? just nut/pessamist, something is going to fail.
Title: Re: Wheel Seal part number cross reference MC 9, GM 4106, 4107
Post by: Just Dallas on July 08, 2011, 06:01:06 AM
Ralph, the wiper shouldn't be a pain to remove. Just heat it with a propane torch and it will slide right off. Same with installing it. Heat the wiper up really good with a propane torch and it will slip right on.
If you drive it on you stand a good chance of warping it.
Title: Re: Wheel Seal part number cross reference MC 9, GM 4106, 4107
Post by: Ralph7 on July 08, 2011, 07:43:30 AM
  Thanks Dallas the one first one I removed from the right side was I think a national and I knew I was or had trouble when it was more effort was needed to get it the last 1/4in..
  We should have changed it down there! I had a 45010 with me. 
Text only | Text with Images