Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Jaime on June 11, 2011, 11:07:36 AM

Title: MCI Parts Number Cross index.
Post by: Jaime on June 11, 2011, 11:07:36 AM
I am going to have to order a new inversion Valve for my 1967 5a. As I was repairing a leaking hose that was connected to it when I noticed that the housing was wearing through were it is mounted. I have the Parts and Maintenance manuals and the part number is 4B-29-1 for the complete assembly, I could not find any marking on the actual unit, but I imagine it is made by Bendix and would be available locally if I had a way to cross reference it. I did go to the Bendix web site and used the MCI part number in the Bendix cross reference tool it responded with no article found. So I guess what I am asking is there a Cross reference list for MCI parts to Bendix Parts? Any guidance appreciated. I will see if I can post a picture of the wear as I was supprised how deep it had worn.
Title: Re: MCI Parts Number Cross index.
Post by: wildbob24 on June 11, 2011, 11:18:48 AM
Jaime,

MCI shows that number as being superseded by 4G-29-1. Try your Bendix cross reference search without the dashes in the MCI number. You'll get a positive result using the new number.

Bob
Title: Re: MCI Parts Number Cross index.
Post by: Jaime on June 11, 2011, 12:55:49 PM
wildbob24, Thank you very much I will do the search now.
Title: Re: MCI Parts Number Cross index.
Post by: Jaime on June 11, 2011, 02:13:38 PM
by the picture yu can see it is almost wore through, Then I would really have an air leak.
Text only | Text with Images