Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: travlinman on April 22, 2011, 08:10:38 PM

Title: Stone Bennet Shifter Adjustment
Post by: travlinman on April 22, 2011, 08:10:38 PM
Hey Guys,

Finally got the old girl out for a test drive today after an extensive interior redo. All is well except for the shifter. It does manual downshifts well, but by the end of the drive up-shifts were not happening. I had to push on the shift rod while my partner hit the the button. Only then would it go back into neutral. Any adjustments that I can make to the shifter? Here are a few photos for reference.

Thanks

TM
Title: Re: Stone Bennet Shifter Adjustment
Post by: Van on April 23, 2011, 06:22:28 AM
Bump :)
Text only | Text with Images